• Customer Note: If the cone angle is 30º AND the thread pitch is Metric (1.5mm, 2.0mm etc.) then check out our line of KOMATSU fittings. A Komatsu example would have a 30º cone and 1.5mm threads per inch. If the Outside Diameter of the threads is 14mm then the thread can safely be determined to be a metric 14 X 1.5 with a 30º cone. Ask your Malone Sales Rep. for more information
  • The Push to Lock series are designed for use with metric plastic tubing. The tube end or ends of the fitting are designed to accept the tubing and lock it in place by simply inserting it into the fitting. The tube may be released by pressing in on the collar surrounding the tube. This series is also available for inch size tubing to NPT threads.NOTE: THIS SERIES IS NOT DOT APPROVED.
  • Malone Specialty offers a wide variety of hoses for a wide variety of applications. Talk to your Malone sales representative to determine the right hose for you. For Service Temperature Range, Maximum operating Temperatures, Hose material or other hose specifications call us. Virtually all hydraulic and push-on hose correspond in size to U.S. standards. The size may be called out using the actual inside diameter in millimeters or a nominal diameter abbreviated "NW", newnweite or "DN" Pressure ratings are listed in PSI (pounds per square inch) or BAR where 1 BAR = 14.5PSI
  • To assist in identification and assembly of metric and standard components Malone Specialty, Inc. offers a variety of special tools and convenience items.